|
Post by Tim Draggoo on Mar 13, 2015 12:20:17 GMT -5
Please see the update to the Clone Rule Package. (This was mandated by IKF)
328. Clone Class
328.1. The motor is a no touch rule. Removal of governor assembly and fuel tank only is allowed. Jetting is allowed for tuning. All IKF safety regulations must be followed. The only approved parts are listed below:
328.1.1. Harbor Freight 6.5 HP blue or black predator motor only. 328.1.2. Exhaust pipe & muffler (Max 1 inch in diameter single stage max 22 inch length) 328.1.3. Billet flywheel required – Per IKF Rule 722.18 328.1.4. Any single valve spring allowed. Maximum wire diameter of .071" with a maximum pressure of 10.8 lbs. at .850". 328.1.5. Any air filter allowed. After market filter adapter allowed (Maximum Length 1.375”). 328.1.6. Fuel - Pump gas with no additives (Ethanol Free). 328.1.7. Restrictors: 328.1.7.1. Jr 1 (Blue ) .550” One hole (Must have a gasket on both sides of restrictor)
328.2. ALL MOTORS ARE TO REMAIN AS SUPPLIED FROM HARBOR FREIGHT. Tech will reference, (for comparison purposes) a component against a known stock part.
All Jr 1 Karts must have the proper restrictor plate installed before being allowed on the track for practice or racing.
I have ordered some restrictor plates that will be available for $15. I will these at the track next Thursday 3/19 and Sunday 3/22.
Tim Draggoo
|
|
|
Post by motomedic on Mar 17, 2015 17:22:52 GMT -5
Tim I would like to get one of the restrictor plates from you on Thursday, I have made an attempt at 3 different vendors to purchase and there all on backorder. I will also turn in Cody's paperwork and fees. See you Thursday. Dwayne
|
|
|
Post by Tim Draggoo on Mar 17, 2015 18:47:12 GMT -5
I have a few that are not spoken for so ill save one for you.
Sent from my SAMSUNG-SM-N900A using proboards
|
|